GE GSHF3KGZWW 数据表
22
Installation Instructions
LOADING THE REFRIGERATOR
ONTO A HAND TRUCK
ONTO A HAND TRUCK
Leave all tape and door pads on doors until
the refrigerator is in its final location.
To move the refrigerator, use a padded hand
truck. Center the refrigerator on the hand truck
and secure the strap around the refrigerator.
DO NOT OVERTIGHTEN THE STRAP.
the refrigerator is in its final location.
To move the refrigerator, use a padded hand
truck. Center the refrigerator on the hand truck
and secure the strap around the refrigerator.
DO NOT OVERTIGHTEN THE STRAP.
1
REMOVE THE BASE GRILLE
Remove the grille by removing the two Phillips
head screws.
head screws.
2
If the refrigerator must go through
any entrance that is less than 38
any entrance that is less than 38
″
wide,
the doors must be removed. Proceed to
Step 3.
Step 3.
DO NOT remove the handles.
If all entrances are more than 38
″
wide,
skip to Installing the Refrigerator.
DISCONNECT THE WATER COUPLING
(on some models)
(on some models)
If the refrigerator has a water dispenser,
there is a water line from the cabinet into
the bottom hinge on the freezer door that
must be disconnected.
To disconnect, push in on the white collar
of the coupling and pull out the tubing.
there is a water line from the cabinet into
the bottom hinge on the freezer door that
must be disconnected.
To disconnect, push in on the white collar
of the coupling and pull out the tubing.
3
White collar
Bottom
freezer
hinge
freezer
hinge
MOVING THE REFRIGERATOR