Sennheiser RS 175 业主指南
Troubleshooting
RS 175
| 29
Leaving the range of the transmitter
The range of the transmitter largely depends on environmental conditions
such as wall thickness, wall composition etc. If the headphones leave the
range of the transmitter, the audio first cuts out occasionally until it finally
cuts out completely.
such as wall thickness, wall composition etc. If the headphones leave the
range of the transmitter, the audio first cuts out occasionally until it finally
cuts out completely.
If you
re-enter the transmission range within 5 minutes
, the connection is
automatically re-established.
If you spend
If you spend
more than 5 minutes outside the transmission range
, the
headphones switch off automatically.
Clearing the pair settings on the headphones
1
Press the Volume
+
/
-
buttons simultaneously and hold for 2 seconds.
The HDR status LED blinks red rapidly.
2
Press the HDR power button
while continuously holding the Volume
+
/
-
buttons. Release all 3 buttons.
The HDR status LED lights up green or red, depending on the battery
condition, and starts blinking slowly. The pair settings on the head-
phones are cleared.
condition, and starts blinking slowly. The pair settings on the head-
phones are cleared.
SURR
LO
HI
BASS
1
2
BASS
SURR
BASS
BASS
SURR
SURR
2s