Samsung SM-T110NDWACCC 业主指南

4

Assemble Your Device

Getting Started

This section helps you to 

assemble your device.

Install an Optional Memory Card

You can install an optional microSD or microSDHC 
memory card (not included) to expand available 
memory space.

Note: A memory card can be installed at any time; it 
is not necessary to install it prior to using the device.

For more information on installing a memory card, 
see 

.

Charge the Battery

Your device is powered by a rechargeable, standard 
Li-Ion battery. A Wall/USB Charger (charging head 
and USB cable) is included with the device for 
charging the battery. 

The battery comes partially charged. A fully 
discharged battery requires up to four hours of 
charge time. You can use the device while charging.

Caution: Use only Samsung-approved charging 
devices and batteries. Samsung accessories are 
designed to maximize battery life. Using other 
accessories may invalidate your warranty and may 
cause damage.

1.  Insert the USB cable into the port.

2.  Connect the USB cable to the charging head, 

then plug the charging head into a standard 
AC power outlet.

3.  When charging is complete, unplug the charging 

head from the power outlet and remove the USB 
cable from the device.

When to Charge the Battery

When the battery is low and only a few minutes of 
operation remain, the device sounds a warning tone 
at regular intervals.

In this condition, your device conserves its 
remaining battery power by dimming the screen.

When the battery level becomes too low, the device 
automatically turns off.

 

► For a quick check of your battery level, view 

the battery charge indicator located in the 
upper-right corner of your device’s display. A 
solid color (   ) indicates a full charge.

You can also choose to display a percentage 
value. Viewing a percentage value can provide 
a better idea of the remaining charge on the 
battery. For more information, see 

Assemble Your Device