Oasis R1P - Remote Water Chiller 规格说明表单

 

Remote drinking water chiller shall deliver at least 1.0 gph of 

water at 50° F cooled from 80° F inlet water at 90° F ambient. 

Evaporator shall be copper evaporator tube on stainless steel 

water storage tank and both shall be encapsulated in insulation. 

Total water system shall be stainless steel. R-134a refrigerant 

system shall be hermetically sealed and refrigerant flow shall be 

capillary tube controlled. An adjustable thermostat having an off 

position shall control refrigeration system. Potable water system 

components shall comply with Safe Drinking Water Act Amend-

ments, the 1988 Lead Contamination Control Act and shall be 

Certified to ANSI 61 Section 9. Cooler shall be Listed by 

Underwriters Laboratories Inc. to U.S. and Canadian safety 

standards. Drinking water chiller shall be Oasis model R1P. 

> Powder coated galvanized steel cabinet with plastic front

> Air-cooled; designed to fit under a sink

> Compact, economical and easily installed

> Four foot (4’) insulated power cord with NEMA 5-15 plug

> Stainless steel storage tank

> 1/4” OD stainless steel water tube connections

> Welded water lines to eliminate corrosion and 

   assure leakproof operation

> HFC Refrigerant R-134a

> Product Certified to NSF/ANSI Standard 61, 

   Annex G (AB1953)

 
 

 

Components in these water coolers are lead free as

 

defined by the Safe Water Act Amendments of 1986,

 

and the Lead Contamination Control Act of 1988.

Limited 1-Year Warranty (Continental limits of the United 

States and Canada):  One year from the date of installation. 

Detailed warranty certificate enclosed with each drinking 

fountain; sample copy available upon request.

Export Warranty: One year on component parts. Detailed 

warranty certificate enclosed with each drinking fountain; 

sample copy available upon request.

Product Certified to NSF/ANSI Standard 61, Annex G 

(weighted average lead content of <=0.25%) and is in compli-

ance with California's Health & Safety Code Section 116875 

(commonly known as AB1953).

Model covered by this specification complies with all 

known Plumbing Codes. Listed by Underwriters’ Laboratories 

to U.S. and Canadian standards and conform to European 

Union Directives.

**

Specifications subject to change without notice

Model

Cooling Capacity

GPH

50° F Drinking Water

90° F Ambient Air Temp*

Base Rate

GPH

Pre-Cooler

Compr.

HP

Full Load 

Amps

Rated

Watts

115 Volts, 60 HZ

Glass Filler

Acc. Option

Cabinet

Color Finish

Net Wt. 

Approx.

R1P

 1

n/a  n/a

n/a  1/20 1.3 135 n/a  

White/gray

 30 

Lbs.

Hot ’N Cold™

Model

*Industry Standard Rating Condition 80° F inlet water temperature.