Le Cache 2400 Series 286 Bottle Wine Cellar - Chocolate Cherry Finish 业主指南
L E C A C H E P R E M I U M W I N E C A B I N E T S
-22-
HA2 The
condenser
temperature
temperature
is too high
(above
125°F for 2
(above
125°F for 2
hours)
Check for appropriate installation, ventilation, ambient
conditions and cooling capacity (Chapter II)
Clean the condenser coils (see “Maintenance” in
conditions and cooling capacity (Chapter II)
Clean the condenser coils (see “Maintenance” in
Chapter IV);
Check for obstructions to the intake and/or exhaust
vents;
Check that the condenser fan is operating
Check for obstructions to the intake and/or exhaust
vents;
Check that the condenser fan is operating
LA The
temperature
inside the
cellar is too
inside the
cellar is too
cold (below
45°F)
45°F)
Raise the ambient temperature; Raise the “Minimum
Set Point”
Set Point”
LA2 The
temperature
at the
condenser
at the
condenser
coils (outside
the cabinet)
has dropped
below the
the cabinet)
has dropped
below the
alarm
temperature
setting
temperature
setting
Lower the alarm temperature setting as follows:
1. Depress the “Set” and “Down” button for three
1. Depress the “Set” and “Down” button for three
seconds until the display reads “HY”
2. Depress the “Set” and “Down” button for seven
seconds until “PR2” flashes on the display
3. Using the “Down” button, scroll until the display
reads “AL2”
4. Depress the “Set” button and lower the alarm
temperature setting to your desired setting
* Please note: the temperature alarms (HA, HA2, LA and LA2) are disabled during the first 23
hours of operation after the cooling unit is plugged in and/or turned on.
hours of operation after the cooling unit is plugged in and/or turned on.