Electrolux EI30ES55JS 安装指导

5

 

Remove the protective channels on each side of the cooktop 

  (if provided).

  Slide the unit into the cabinet. Make sure the center of the unit is 

aligned with the center of the cabinet cut-out.

 

 

  After the installation, MAKE SURE that the 

unit is supported by the two front leveling 

legs and the two adjustable leveling wheels 

and NOT by the cooktop.

  

The metal flange under each side of the cooktop MUST be 

placed over the cabinet countertop for proper unit support.  

The cooktop should NOT rest directly on the countertop (see 

illustration 2) or else it could cause damage to the cooktop 
voiding the warranty.  Level the unit if needed.

Before installing the unit, measure the heights of the two (2) 

cabinet sides (H1-4), front and back (see illustration 1) from the 
floor to the top of the counter.

H1

H2

H3

H4

The counter-top around the cut-out should be flat and 
leveled (see hatched area on illustration 1).

Illustration 1

Shave
Raised
Edge
to Clear
Space for a 
31½" (81 cm) 

1 ½" Max.

(3.8 cm Max.)

Wide

 

Cooktop.

Illustration 2

To successfully install 

the range, the initial 

level height from 

floor to underside 

of cooktop frame 

should be at least    

1/16" taller than 

cabinet  sides  as 

measured in step 2.

Level the range using 

the two (2) front leveling 

legs and the two (2) 

adjustable leveling wheel, 

so that the height from 

the floor to the underside 

of the metal flange is 

Metal 

Flange

greater than the tallest cabinet measurement by 

at least 1/16" (see illustration 2).

  Remove and discard the two rear leveling legs, 

  they are only in place to solidify the unit for the transport.