Electrolux E23CS78HPS 业主指南
14
CAUTION
The alarm system does not automatically
reset if you disconnect and reconnect your
refrigerator’s power cord. It can only be
reactivated by pressing the Alarm Reset button.
reset if you disconnect and reconnect your
refrigerator’s power cord. It can only be
reactivated by pressing the Alarm Reset button.
Controls & Settings
Using The Alarm Reset Button
You can disable or activate the
alarm system by pressing and
holding the Alarm Reset button for
three seconds. Use it, for example,
to turn off audible tones and/or
flashing indicator lights.
alarm system by pressing and
holding the Alarm Reset button for
three seconds. Use it, for example,
to turn off audible tones and/or
flashing indicator lights.
Once you disable the alarm system, you must
again press and hold the Alarm Reset button for
three more seconds to reset (activate) the alarm
system. The On indicator light remains off while
the Freezer and Fresh Food compartments cool
toward the current temperature settings. When
temperature settings are reached, the On light
displays green to indicate an active alarm system.
again press and hold the Alarm Reset button for
three more seconds to reset (activate) the alarm
system. The On indicator light remains off while
the Freezer and Fresh Food compartments cool
toward the current temperature settings. When
temperature settings are reached, the On light
displays green to indicate an active alarm system.
Air Filter
On/Off
Button
Indicator
Lights
Checking the Air Filter Status
(some models)
Your refrigerator’s fresh food air filter needs to be
replaced from time to time. You can monitor the
need for replacement by pressing and holding the
Air Filter On/Off button for three seconds.
replaced from time to time. You can monitor the
need for replacement by pressing and holding the
Air Filter On/Off button for three seconds.
To check the air filter status:
1 Press the Air Filter On/Off button. This
1 Press the Air Filter On/Off button. This
activates a test cycle, and one of the three
filter status lights displays, indicating one of
the following:
filter status lights displays, indicating one of
the following:
Filter OK - Air filter does not need changing.
Order Filter - Air filter is about 80 percent
used. Please order new one.
Change Filter - Air filter is 100 percent used.
Please change now.
used. Please order new one.
Change Filter - Air filter is 100 percent used.
Please change now.
2 Press the Air Filter On/Off button to turn off
the status light.