Electrolux EW30ES80RS 业主指南

1.  Remove the rack from the oven and place 

the rack on a large flat surface covered with

newspaper or scrap cloth. Fully extend the rack.

2.  Wipe away debris and crumbs from the glide 

track using a cloth or sponge.

4.  Extend and return the glide rack several times 

along the tracks to distribute the lubrication.

5.  Turn glide rack over. Shake graphite lubrication 

very well before applying. Place four drops of 

graphite lubrication along the tracks. Repeat on 

both sides of the glide rack.

6.  Extend and return the glide rack several times 

along the tracks to distribute the lubrication.

7.  Apply a thin layer of cooking oil to the outer frame 

of  the  glide  rack  as  shown  below.  Keeping  the

frame sides lightly lubricated allows the entire 

rack to slide easily when changing rack positions.

8.  Replace rack in oven right-side up.

Handle oven racks only when they are cool. After 

cooking or after the self clean cycle, racks will be 

very hot and can cause burns.

 

•  It is recommended to remove all racks from the 

oven during self-clean cycles, but porcelain racks 

may be left in the oven if they are soiled. After a 

self clean cycle, or anytime the gliding is rough, 

the glide racks should be treated with graphite 

lubrication. 

•  Do not use cooking oil, cooking spray, or other

oil-based lubrication products on the glide rack 

extension tracks. Use only the graphite lubrication 

in this area. To order graphite lubrication, contact 

your installer, servicer or dealer.

•  It is important that the parts of the rack that contact 

the oven sides always have a light coating of 

vegetable oil. Apply a thin layer of vegetable oil to 

the sides of the rack after every self-clean cycle 

and when the rack becomes difficult to reposition

in the oven.

3.  Shake graphite lubrication very well before 

applying. Place four drops of graphite lubrication 

along the tracks (see area circled on figure

below). Repeat on both sides of the glide rack.