Milwaukee 5368-22 用户手册

5.  After drilling to about the depth of the 

core bit teeth, remove the center pin and 
guide plate from the core bit. Resume 
drilling.

6.  To change the core bit, hold the tool up-

wards, pointing it away from your body 
as shown, and run it briefl y  in  forward 
to loosen the core bit from the adapter 
(Fig. 8).

NOTE: To make holes deeper than 3", 
remove the core bit, break and remove the 
core. Resume drilling.

Keep your tool in good repair by adopting a 
regular maintenance program. Before use, 
examine the general condition of your tool. 
Inspect guards, switches, tool cord set and 
extension cord for damage. Check for loose 
screws, misalignment, binding of moving 
parts, improper mounting, broken parts and 
any other condition that may affect its safe 
operation. If abnormal noise or vibration oc-
curs, turn the tool off immediately and have 
the problem corrected before further use. 
Do not use a damaged tool. Tag damaged 
tools “DO NOT USE” until repaired (see 
“Repairs”).

Under normal conditions, relubrication is not 
necessary until the motor brushes need to 
be replaced. After six months to one year, 
depending on use, return your tool to the 
nearest MILWAUKEE service facility for the 
following:

• Lubrication

• 

Brush inspection and replacement

• 

Mechanical inspection and cleaning 
(gears, spindles, bearings, housing, 
etc.)

• 

Electrical inspection (switch, cord, 
armature, etc.)

• 

Testing to assure proper mechanical and 
electrical operation

To reduce the risk of injury, always un-
plug your tool before performing any 
maintenance. Never disassemble the 
tool or try to do any rewiring on the 
tool's electrical system. Contact a 
MILWAUKEE service facility for ALL 
repairs.

Clean dust and debris from vents. Keep 
the tool handles clean, dry and free of oil 
or grease. Use only mild soap and a damp 
cloth to clean your tool since certain cleaning 
agents and solvents are harmful to plastics 
and other insulated parts. Some of these 
include: gasoline, turpentine, lacquer thinner, 
paint thinner, chlorinated cleaning solvents, 
ammonia and household detergents con-
taining ammonia. Never use fl ammable  or 
combustible solvents around tools.

If your tool is damaged, return the entire tool 
to the nearest service center.

For a complete listing of accessories refer to 
your MILWAUKEE Electric Tool catalog or go 
on-line to www.milwaukeetool.com. To obtain 
a catalog, contact your local distributor or a 
service center.

Every MILWAUKEE tool is tested before 
leaving the factory and is warranted to be 
free from defects in material and workman-
ship. MILWAUKEE will repair or replace (at 
MILWAUKEE’s discretion), without charge, 
any tool (including battery chargers) which 
examination proves to be defective in ma-
terial or workmanship from fi ve (5) years 
after the date of purchase. Return the tool 
and a copy of the purchase receipt or other 
proof of purchase to a MILWAUKEE Factory 
Service/Sales Support Branch location or 
MILWAUKEE Authorized Service Station, 
freight prepaid and insured. This warranty 
does not cover damage from repairs made 
or attempted by other than MILWAUKEE au-
thorized personnel, abuse, normal wear and 
tear, lack of maintenance, or accidents.

The warranty period for V28 Battery Packs 
is two (2) years from the date of purchase. 
The warranty period for Ni-Cd battery Packs, 
Flashlights, Radios are warranted for one (1) 
year from the date of purchase. 

THE REPAIR AND REPLACEMENT REM-
EDIES DESCRIBED HEREIN ARE EXCLU-
SIVE. IN NO EVENT SHALL MILWAUKEE 
BE LIABLE FOR ANY INCIDENTAL, SPE-
CIAL, OR CONSEQUENTIAL DAMAGES, 
INCLUDING LOSS OF PROFITS.

THIS WARRANTY IS EXCLUSIVE AND IN 
LIEU OF ALL OTHER WARRANTIES, OR 
CONDITIONS, WRITTEN OR ORAL, EX-
PRESSED OR IMPLIED FOR MERCHANT-
ABLILITY OR FITNESS FOR PARTICULAR 
USE OR PURPOSE.

This warranty gives you specifi c legal rights. 
You may also have other rights that vary from 
state to state and province to province. In 
those states that do not allow the exclusion of 
implied warranties or limitation of incidental 
or consequential damages, the above limi-
tations or exclusions may not apply to you. 
This warranty applies to the United States, 
Canada, and Mexico only.

Chuck Adapter Kit
Cat. No. 48-66-1370 includes:
 • Chuck Adapter
 

 

• 1/2" 

 

 

 • Set Screw