National Instruments 800 Series 用户手册
Chapter 3
VXIpc 800 Series Configuration and Installation
3-14
© National Instruments Corporation
4.
Insert the VXIpc-800 in the slot you have selected by aligning the
top and bottom of the module with the card-edge guides inside the
mainframe. Slowly push the VXIpc-800 straight into the slot until
its plug connectors are resting on the backplane receptacle
connectors. Using slow, evenly distributed pressure, press the
module straight in until it seats in the expansion slot. The front
panel of the VXIpc-800 should be even with the front panel of the
mainframe.
top and bottom of the module with the card-edge guides inside the
mainframe. Slowly push the VXIpc-800 straight into the slot until
its plug connectors are resting on the backplane receptacle
connectors. Using slow, evenly distributed pressure, press the
module straight in until it seats in the expansion slot. The front
panel of the VXIpc-800 should be even with the front panel of the
mainframe.
5.
Tighten the retaining screws on the top and bottom edges of the
front panel.
front panel.
6.
Check the installation.
7.
Connect the keyboard and mouse to the appropriate connectors.
Use the keyboard adapter cable that your received with your kit to
adapt AT-style keyboards to the VXIpc-800 mini-DIN connector.
Use the keyboard adapter cable that your received with your kit to
adapt AT-style keyboards to the VXIpc-800 mini-DIN connector.
8.
Connect the VGA monitor video cable to the VGA connector.
9.
Connect devices to ports as required by your system configuration.
Some ports, such as the COM ports, have adapter cables that you
can order from National Instruments.
Some ports, such as the COM ports, have adapter cables that you
can order from National Instruments.
10. Replace or close any doors or covers to the mainframe.