Xerox DocuPrint 96 参考指南
Guide to Performing Routine Maintenance
1-1
1.
Feeder trays
This chapter shows the steps needed to load and check feeder
trays on the DocuPrint 96/4635/180 NPS/IPS, and explains what
actions are necessary if paper stock is changed.
trays on the DocuPrint 96/4635/180 NPS/IPS, and explains what
actions are necessary if paper stock is changed.
NOTE: The number of feeder trays on your system depends on
the number of feeder/stacker modules installed.
the number of feeder/stacker modules installed.
Checking feeder trays
Check the amount of paper remaining in each feeder tray by
examining the green lights above the icons on the door of the
tray.Each light represents 25% of a ream, or about 125 sheets of
20-pound or 80 gsm (grams per square meter) paper.
examining the green lights above the icons on the door of the
tray.Each light represents 25% of a ream, or about 125 sheets of
20-pound or 80 gsm (grams per square meter) paper.