Xerox DocuPrint 96 参考指南
Guide to Performing Routine Maintenance
4-1
4.
Adding dry ink
Dry ink (or toner) is the black powder that forms the image on the
printed page. This chapter describes the procedure for adding
dry ink to the printer.
printed page. This chapter describes the procedure for adding
dry ink to the printer.
When the printer is low on dry ink, the Attention light turns on,
and the message
and the message
ADD DRY INK
displays on the printer console.
Add dry ink at your earliest convenience.
If you do not add dry ink, the printer eventually stops printing. It
does not resume printing until you replace the dry ink bottle.
does not resume printing until you replace the dry ink bottle.
CAUTION
To prevent dry ink spillage, remove the cartridge only when
directed to do so by a message on the printer control console.
directed to do so by a message on the printer control console.
Use the procedure on the following pages to add dry ink to your
Xerox DocuPrint 96/4635/180/2000 Series NPS/IPS.
Xerox DocuPrint 96/4635/180/2000 Series NPS/IPS.
To add dry ink:
1. Open the printer doors and locate the dry ink area on the left
side of the printer.