Xerox Document HomeCentre 用户手册
69
Scan
How does scanning work?
Scanning works like this:
First you choose the drawing, photo, or text you want to
scan into your PC.
You then use the Pagis software to select the scan settings,
such as paper size, orientation, and scan quality
If the document you want to scan is the width of a normal
piece of paper or narrower (8 ½ inches or less), you can
feed one sheet at a time through the attached scanner.
Before scanning in a document, make sure that the
Document Guide is correctly positioned.
If the document is larger, or if it is a page in a book or
magazine, you can detach the scanner and place it on the
page to scan. The scanner will move across the page as it
scans. Note that when scanning in the detached mode, (with
your hand on top of the scanner) you must gently guide the
scanner; be sure not to press down or push the scanner as it
moves across the page.
As you scan the document, the scanner sends the
information to the Pagis program on your PC.
First you choose the drawing, photo, or text you want to
scan into your PC.
You then use the Pagis software to select the scan settings,
such as paper size, orientation, and scan quality
If the document you want to scan is the width of a normal
piece of paper or narrower (8 ½ inches or less), you can
feed one sheet at a time through the attached scanner.
Before scanning in a document, make sure that the
Document Guide is correctly positioned.
If the document is larger, or if it is a page in a book or
magazine, you can detach the scanner and place it on the
page to scan. The scanner will move across the page as it
scans. Note that when scanning in the detached mode, (with
your hand on top of the scanner) you must gently guide the
scanner; be sure not to press down or push the scanner as it
moves across the page.
As you scan the document, the scanner sends the
information to the Pagis program on your PC.