Runco VX-50d 用户手册
Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual
61
PRE
L
IMINAR
Y
Picture
Use the controls in the Picture Menu to calibrate your VX-40d/-50d/-60d/-80d for
optimum picture quality.
optimum picture quality.
The VX-40d/-50d/-60d/-80d has been designed to incorporate setup and calibration
standards established by the Imaging Science Foundation (ISF). The ISF has developed
carefully crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these standards to
obtain optimal picture quality from Runco video display devices. Accordingly, Runco
recommends that setup and calibration be performed by an ISF certified installation
technician.
standards established by the Imaging Science Foundation (ISF). The ISF has developed
carefully crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these standards to
obtain optimal picture quality from Runco video display devices. Accordingly, Runco
recommends that setup and calibration be performed by an ISF certified installation
technician.
All signal types require separate processing. Therefore, you need to calibrate each DHD
Controller input separately. Runco recommends calibrating the inputs in this order:
Controller input separately. Runco recommends calibrating the inputs in this order:
1. Component SD
2. S-Video 1 / S-Video 2
3. Composite
4. HD/RGB 1 / HD/RGB 2
5. DVI 1 / DVI 2
Virtualwide 2.35
SVC
A 2.35 image is stretched
anamorphically in both direc-
tions to fill a 16:9 image. (The
secondary anamorphic lens then
“stretches” the image back to
2.35:1.)
anamorphically in both direc-
tions to fill a 16:9 image. (The
secondary anamorphic lens then
“stretches” the image back to
2.35:1.)
Virtualwide 2.35 is available only
on VX-40d/-50d/-60d/-80d pro-
jectors equipped with the Cine-
Wide option.
on VX-40d/-50d/-60d/-80d pro-
jectors equipped with the Cine-
Wide option.
Table 4-1. Aspect Ratio Settings (continued)
Aspect Ratio
Remote
Control
Key
Description
2.35:1 Image on
16:9 Screen
2.35:1 Image on
16:9 Screen with
VirtualWide 2.35
2.35:1 Image on
2.35:1 Screen with
VirtualWide 2.35
Picture
Brightness
Contrast
Color
Tint
Sharpness
When you change a picture quality setting, save the change to a
preset afterwards. Otherwise, the change will be lost when a
different input is selected. (Picture quality settings are saved for
each input separately.) For information about saving settings, refer
to
preset afterwards. Otherwise, the change will be lost when a
different input is selected. (Picture quality settings are saved for
each input separately.) For information about saving settings, refer
to
Note