Barco 4MP 用户手册
20
Coronis Fusion 4MP/6MP
3
Lift the plastic frame that covers the fixation of the panel to the
stand. Turn it for 45 degrees to uncover the fixation screws.
stand. Turn it for 45 degrees to uncover the fixation screws.
4
Unscrew the four fixation screws fixing the panel to the stand.
5
Attach the panel firmly to the arm using 4 screws M4 x 10 mm.
You should mount the panel in landscape position.
Portrait position is possible but not supported.
Portrait position is possible but not supported.
Use an arm that can support a weight of at least 21.6 kg
(47.62 lbs). Failure to do so could make the panel fall,
causing serious injury to a child or adult, and serious
damage to the equipment.
(47.62 lbs). Failure to do so could make the panel fall,
causing serious injury to a child or adult, and serious
damage to the equipment.
Never move a display attached to an arm by pulling or
pushing the display itself. Instead, make sure that the
arm is equipped with a VESA approved handle and use
this to move the display.
Please refer to the instruction manual of the arm for more
Please refer to the instruction manual of the arm for more
information and instructions.