Kawai MP8II 用户手册
65
01H 64H
mmH
Decay time
mm:00H - 7FH(-64 ~ 0 ~ +63)
Default = 40H
01H 66H
mmH
Release time mm:00H - 7FH(-64 ~ 0 ~ +63)
Default = 40H
* Ignoring the LSB of data Entry
* It is not affected in case of modifying cutoff if tone does not use the DCF.
* It is not affected in case of modifying cutoff if tone does not use the DCF.
RPN MSB/LSB
Status
2nd Byte
3rd Byte
BnH
65H
mmH
BnH
64H
llH
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)
mm=MSB of the RPN parameter number
ll=LSB of the RPN parameter number
ll=LSB of the RPN parameter number
RPN number implemented in MP8II are the followings
RPN #
RPN #
Data
MSB LSB MSB LSB
Function & Range
00H 00H mmH llH
Pitch bend sensitivity
mm:00H-0cH (0~12 [half tone]),ll:00H
Default=02H
00H 01H mmH llH
Master fine tuning
mm,ll :20 00H - 40 00H - 60 00H (-8192x50/8192 ~ 0 ~ +8192x50/8192 [cent])
00H 02H mmH llH
Master coarse tuning
mm:28H - 40H - 58H(-24 ~ 0 ~ +24 [half tone]), ll:Ignored(as 00H)
7fH 7fH
-- --
RPN NULL
Program Change
Status
2nd Byte
CnH
ppH
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)
pp=Program number
:00H - 7fH(0 ~- 127)
Default = 00H
Pitch Bend Change
Status
2nd Byte
3rd Byte
EnH
llH
mmH
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)
mm,ll=Pitch bend value
:00 00-7f 7fH(-8192~0~+8192)
Default = 40 00H
1.2 Channel Mode Message
All Sound OFF
Status
2nd Byte
3rd Byte
BnH
78H
00H
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)
Reset All Controller
Status
2nd Byte
3rd Byte
BnH
79H
00H
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)
All Note Off
Status
2nd Byte
3rd Byte
BnH
7bH
00H
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)