Multiquip DCA180SSJU 用户手册

Loads can be connected to the generator by the 

 or the convienience receptacles (Figure 14).

Make sure to read the operation manual before attempting
to connect a load to the generator.

To protect the output terminals from overload, a
3-pole, 500A 

circuit breaker is provided. Make sure to

switch  ALL circuit breakers to the OFF position prior to
starting the engine.

An 

  (Figure 15) is connected to the main

circuit breaker.  In the event of an overload, both the circuit
breaker and the over current relay may trip.  If the circuit
breaker can not be reset, the 

 on the over cur-

rent relay must be pressed.  The over current relay is located
in the control box.