Fujitsu fi-6140Z 用户手册
Chapter 9 Operational Settings
170
3
Adjust the level of offset/vertical magnification as needed.
*1: Displayed when using fi-6230Z or fi-6240Z.
Offset Setting
Description
Unit
Select [Flat bed] (*1), [ADF (front)] or
[ADF (back)] as the target for offset adjustment.
[ADF (back)] as the target for offset adjustment.
Main
Adjusts the horizontal (width) offset.
The value can range from -2 to +2 mm (in
increments of 0.5).
The value can range from -2 to +2 mm (in
increments of 0.5).
Sub
Adjusts the vertical (length) offset.
The value can range from -2 to +2 mm (in
increments of 0.5).
The value can range from -2 to +2 mm (in
increments of 0.5).
Vertical magnification
Adjustment
Description
Unit
Select [Flat bed] (*1) or [ADF] as the
target for vertical magnification
adjustment.
target for vertical magnification
adjustment.
Vertical magnification
Adjustment
(Sub: length)
Adjustment
(Sub: length)
Adjusts the vertical (length)
magnification.
The value can range from -3.1 to
+3.1% (in increments of 0.1).
magnification.
The value can range from -3.1 to
+3.1% (in increments of 0.1).