Sony SLT-A99 手册

下载
页码 100
53
Inserting the battery pack/memory card (sold separately)
P
reparing the c
a
mera
To remove the memory card
Check that the access lamp (page 18) is not lit, then open the memory card 
cover, and push the memory card once.
To check the remaining battery level
The supplied battery pack is a lithium-ion battery pack that has functions 
for exchanging information related to operating conditions with your 
camera. The remaining battery time in percent figures is displayed 
according to the operating conditions of your camera.
You can use 2 battery packs installed in the Vertical Grip (sold separately) 
by attaching it to the camera. Including the battery pack installed in the 
camera, this provides a total of 3 battery packs that are switched 
automatically.
You can check the status of these battery packs on the screen.
The remaining battery level of the battery pack inserted in the 
camera
 
The remaining battery level of the battery packs inserted in 
the Vertical Grip
For details on the Vertical Grip, refer to the operating instructions supplied 
with the Vertical Grip.
To remove the battery pack from the camera
Battery level
“Battery 
exhausted.”
High  
Low
You cannot shoot 
any more pictures.
Turn off the camera. Slide the lock lever 
in the direction of the arrow after 
confirming that the vibration of the 
camera has stopped and both the LCD 
screen and access lamp are turned off, 
then remove the battery pack. Be careful 
not to drop the battery pack.
Lock lever