Canon ELAN7NE-33V 用户手册

23

If the film is not loaded properly, the <5> icon will blink on the LCD panel and
the shutter will not work. Reload the film properly.

• The shutter curtains have been manufactured with very high precision. Never

touch them with your fingers. When loading film, do not touch or damage the
curtains with your fingers or film.

• In hot and humid environments, do not remove the film packaging until you

are ready to load the film.

• Infrared film cannot be used with this camera.

The camera reads the film cartridge’s DX code and sets the film speed
automatically within ISO 25 - 5000.
• Set the Mode Dial to a Creative Zone mode.

Move the <7> arrow to the <D>
icon.

•

Look at the LCD panel and press the
<0> button to move the arrow.
(1)

s

The current film speed is displayed.

If you want to set a film speed different from the DX-coded film speed or if the
film cartridge is not DX-coded, see “Setting the ISO Film Speed” on page 73.

C.Fn-03-1 can prevent the film speed from being set automatically with the DX
code. (p.85)