Mitsubishi Electronics DX-TL16U 用户手册
User’s Manual
30
NETWORK SETUP
In the Main screen, use the Left or Right arrow buttons to display the Network menu.
Figure 19
─ Network Menu.
General Settings (NETWORK
General Tab)
Figure 20
─ Network General setup screen.
Highlight the first box beside Remote Watch – bps/ips. Press the Up and Down arrow buttons to set
the Transfer Speed from 50Kbps to 100Mbps or 0.1 ips to 30 ips.
Highlight the second box beside Remote Watch – bps/ips. You can select the unit of measure for the
transfer speed between: bps and ips. Press the
transfer speed between: bps and ips. Press the
button to set the transfer speed.
NOTE: The local recording speed might be affected by various network bandwidth (Transfer Speed)
conditions.
conditions.
Highlight the box beside Remote Watch – Quality and press the
button. You can select the Quality
from: Very High, High, Standard and Low. Press the
button to set the Quality.
NOTE: The higher Quality settings require higher Transfer Speed settings. The transfer speed you
set is the maximum speed. Depending on the network environment, this speed may not be achieved.
set is the maximum speed. Depending on the network environment, this speed may not be achieved.
You can limit the network bandwidth settings so that system does not consume too much network bandwidth.
Highlight the box beside Network Bandwidth Limit and press the Up and Down arrow buttons to set the
desired maximum bandwidth from 50Kbps to 100Mbps.
Highlight the box beside Network Bandwidth Limit and press the Up and Down arrow buttons to set the
desired maximum bandwidth from 50Kbps to 100Mbps.