Mitsubishi Electronics DX-TL16U 用户手册

User’s Manual 

 

46

 
 

  Freeze 

  Sequence 

  Camera Menu 

  Alarm Reset 

  Panic 

  Setup 

  Search Mode 

  Login/Logout 

 

 

Figure 39 

─ Live Monitoring menu. 

 

 

 
Freeze 
 
Selecting 

 (Freeze) in the Live Monitoring menu will freeze the current image on the screen until you 

select 

 again.  It is the same as pressing the 

 (Play/Pause) button on the front panel.  While in the Freeze 

mode, the icon   displays in bottom-left corner if Freeze is selected in the Display setup screen (OSD tab).

 

 
Sequence 
 
Selecting 

 (Sequence) in the Live Monitoring menu causes the cameras to display sequentially.  It is the 

same as pressing and holding the 

Group/Sequence

 button on the front panel for three seconds or longer.  

When in one of the multi-view formats, pressing this button will cause the DVR to go through predefined 
screen layouts (Full Sequence).  Or, the bottom, right screen will display live cameras sequentially (Cameo 
Sequence).  Selecting 

 again in the Live Monitoring menu exits the Sequence mode.  When in one of the 

multi-view formats, pressing the 

Group/Sequence

 button will cause the DVR to go to the next page.  For 

example, if you press the 

Group/Sequence

 button in the 2x2 format, the DVR changes pages as follows: 

 

 

If all the cameras in a page are Off, have lost video or are set to Covert (unless the user has authority to view 
covert cameras), that page will be excluded from the sequence. 

 

NOTE:  The Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo 
sequence monitoring should be selected in the Display setup screen (Main Monitor tab).