Mitsubishi Electronics DX-TL1600EM 用户手册
36
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
3. Turn the JOG dial to flash “BASIC” and turn the SHUTTLE
ring to the right.
ring to the right.
• The sub-item stops flashing. Check that the IMAGE QUALITY
is defined correctly.
is defined correctly.
@IMAGE QUALITY BASIC
MAX REC FIELDS 12.5F
DEFINE GROUP SETTING
By turning the JOG dial, the sub-
item of the IMAGE QLTY shown on the menu will be
changed as follows:
changed as follows:
HIGH SUPERIOR BASIC
MEDIUM STANDARD
4. Turn the JOG dial to move the cursor to MAX REC FIELDS
and turn the SHUTTLE ring to the right.
and turn the SHUTTLE ring to the right.
• The sub-item will start flashing.
5. Turn the JOG dial to display “6.25F” and turn the SHUTTLE
ring to the right to define the setting.
ring to the right to define the setting.
• The sub-item will stop flashing. Check that the MAX REC
FIELDS is defined correctly.
FIELDS is defined correctly.
@MAX REC FIELDS 12.5F
DEFINE GROUP SETTING
A-REC DURATION 15S
@MAX REC FIELDS 6.25F
DEFINE GROUP SETTING
A-REC DURATION 15S
A-REC DURATION 15S
By turning the JOG dial, the sub-
item of the MAX REC FIELDS shown on the menu
will be changed as follows:
will be changed as follows:
25F 12.5F 8.33F 6.25F
1F 2.5F 4.17F 5F
The underlined items cannot be selected when
the MOTION DETECTION setting is active.
When the MOTION DETECTION setting in the
INITIAL SET UP menu is turned ON, the MAX REC
FIELDS for each time setting will be automatically
altered as follows. These settings will not automati-
cally revert to their former values even if MOTION
DETECTION is turned OFF.
FIELDS for each time setting will be automatically
altered as follows. These settings will not automati-
cally revert to their former values even if MOTION
DETECTION is turned OFF.
Case of <NORMAL REC SETTING> menu and <A-
REC/M-DET SETTING> menu.
“25F”
REC/M-DET SETTING> menu.
“25F”
}
“12.5F”, “8.33F”
}
“6.25F” , “5F”
}
“4.17F”
Case of “MODE” in the <TIMER PROGRAM> menu.
“25”
“25”
}
“12.5”, “8.33”
}
“6.25” , “5”
}
“4.17”
6. Turn the JOG dial and move the cursor to “DEFINE GROUP
SETTING” and turn the SHUTTLE ring to the right .
SETTING” and turn the SHUTTLE ring to the right .
• The <DEFINE ALARM GROUP> menu appears.
<DEFINE ALARM GROUP>
CH PRI FILD CH PRI FILD
CH PRI FILD CH PRI FILD
@Q 1 0.39 O 1 0.39
W 1 0.39 P 1 0.39
E 1 0.39 { 1 0.39
R 1 0.39 } 1 0.39
T 1 0.39 q 1 0.39
Y 1 0.39 w 1 0.39
U 1 0.39 e 1 0.39
I 1 0.39 r 1 0.39
W 1 0.39 P 1 0.39
E 1 0.39 { 1 0.39
R 1 0.39 } 1 0.39
T 1 0.39 q 1 0.39
Y 1 0.39 w 1 0.39
U 1 0.39 e 1 0.39
I 1 0.39 r 1 0.39
7. Check that the cursor is next to the CAMERA CH.
1
and
turn the SHUTTLE ring to the right.
• The sub-item will start flashing.
Various recording settings (continued)
<DEFINE ALARM GROUP>
CH PRI FILD CH PRI FILD
CH PRI FILD CH PRI FILD
@Q 1 0.39 O 1 0.39
W 1 0.39 P 1 0.39
E 1 0.39 { 1 0.39
R 1 0.39 } 1 0.39
T 1 0.39 q 1 0.39
W 1 0.39 P 1 0.39
E 1 0.39 { 1 0.39
R 1 0.39 } 1 0.39
T 1 0.39 q 1 0.39
Y
1
0 39
w
1
0 39
8. Turn the JOG dial to display “ 5 ” then turn the SHUTTLE
ring to the right.
ring to the right.
• The “-” is now selected.
<DEFINE ALARM GROUP>
CH PRI FILD CH PRI FILD
CH PRI FILD CH PRI FILD
@Q 5 0.07 O 1 0.39
W 1 0.39 P 1 0.39
E 1 0.39 { 1 0.39
R 1 0.39 } 1 0.39
T 1 0.39 q 1 0.39
W 1 0.39 P 1 0.39
E 1 0.39 { 1 0.39
R 1 0.39 } 1 0.39
T 1 0.39 q 1 0.39
Y
1
0 39
w
1
0 39
9. Repeat Step 7 and 8 setting CAMERA CH.
T
and
turn the
SHUTTLE ring to the right .
• The sub-item will stop flashing. Check that the CAMERA
CH. is defined correctly.
CH. is defined correctly.
<DEFINE ALARM GROUP>
CH PRI FILD CH PRI FILD
CH PRI FILD CH PRI FILD
Q 5 0.08 O 1 0.41
W 1 0.41 P 1 0.41
E 1 0.41 { 1 0.41
R 1 0.41 } 1 0.41
@T - q 1 0.41
Y 1 0.41 w 1 0.41
U 1 0.41 e 1 0.41
I 1 0.41 r 1 0.41
W 1 0.41 P 1 0.41
E 1 0.41 { 1 0.41
R 1 0.41 } 1 0.41
@T - q 1 0.41
Y 1 0.41 w 1 0.41
U 1 0.41 e 1 0.41
I 1 0.41 r 1 0.41
When the “ - ” is assigned, the camera is disabled.
By turning the JOG dial, the sub-
item of the priority shown on the menu will be
changed as follows:
changed as follows:
1 2 3
- 5 4
The define group settings for normal recording
have to be set on the DEFINE GROUP SETTING in
the <NORMAL REC SETTING> menu. For details
of settings for recordings, please refer to page 14.
the <NORMAL REC SETTING> menu. For details
of settings for recordings, please refer to page 14.
10. Turn the SHUTTLE ring to the left.
• The <A-REC/M-DET SETTING> menu will appear.
11. Turn the JOG dial to move the cursor to A-REC DURATION
and turn the SHUTTLE ring to the right.
and turn the SHUTTLE ring to the right.
• The sub-item will start flashing.
12. Turn the JOG dial to display “5M” and turn the SHUTTLE
ring to the right to define the setting.
ring to the right to define the setting.
• The sub-item will stop flashing. Check that the A-REC
DURATION is defined correctly.
DURATION is defined correctly.
@A-REC DURATION 15S
RECORD ALARM ALL
PRE A-REC
@A-REC DURATION 5M
RECORD ALARM ALL
PRE A-REC
“MAN”: Alarm recording continues until the
ALARM IN terminal is cleared.
By turning the JOG dial, the sub-
item of the A-REC DURATION shown on the menu
will be changed as follows:
will be changed as follows:
15S 30S 45S 1M 2M 5M
10S 5S 2S MAN 10M