Baby Trend PY81988 用户手册

PARTS

TO ASSEMBLE PLAYARD

ATTENTION:

Playard must be fully assembled and securely

locked before installing or using other accessories.

1. Unzip bag and remove Playard frame (Fig. 1).

Undo the three (3) Fasten straps and set the

Mattress aside.

2. DO NOT push center down yet.
3. Top rails must be fully erected before lowering

center. Pull up one rail at a time, hold one hand

on each side of the rail and pull up sharply, do

not pull from the middle where the center latch

release is located, make sure both tubes latch in

place and each rail is rigid. (Fig. 2).

IMPORTANT: The center must be raised

while locking the rails. If one rail will lock

but the other side will not then, unlock the rail

by squeezing the release in the center and try

again.

4. Once all four (4) top rails are locked in place,

push down on the center handle (Fig. 3). The

center mechanism will rotate clockwise 90

degrees and automatically lock in place.

ASSEMBLY

IMPORTANT!

To ensure safe operation of your playard,

please follow these instructions carefully. Please keep these

instructions for future reference.

IMPORTANT!

Before assembly and each use, inspect this

product for damaged hardware, loose joints, missing parts or sharp

edges. NEVER use if any parts are mssing or broken.

IMPORTANT!

Adult assembly is required.

Fig. 1

Fig. 2

Playard

Mattress

Fig. 3

Playard

Mattress

Bassinet

Travel / Storage Bag

Check the parts list on the back cover to make sure you have

all the parts for this model before assembling the playard.

Fixed Mobile*

*Toy type vary

Metal Support Tubes

(2 male, 2 female)

Diaper Stacker