Britax BB0-702-00 产品宣传册
You must ensure that you follow these instructions carefully and correctly. If this seat is not
fi tted securely and your child is not strapped in correctly, your child and other passengers are
at serious risk of injury in the event of an accident
fi tted securely and your child is not strapped in correctly, your child and other passengers are
at serious risk of injury in the event of an accident
Please read this User Guide carefully BEFORE trying to install your child car seat.
The Hampshire Trading Standards Authority and Britax
advise that child car seats should not be bought or sold
second-hand. Please dispose of your child seat safely.
Do not sell or pass it on.
advise that child car seats should not be bought or sold
second-hand. Please dispose of your child seat safely.
Do not sell or pass it on.
After an accident, the child seat and your car seat
belts should be replaced. Although they may look
undamaged, if you were to have another accident the
child seat and your car seat belts may not be able to
protect your child as well as they should.
belts should be replaced. Although they may look
undamaged, if you were to have another accident the
child seat and your car seat belts may not be able to
protect your child as well as they should.
No child seat is escape proof
Harness systems cannot be designed to be completely
“child proof” and yet comply with the legal requirements
of European Standard ECE R44. The harness must be
fastened and adjusted correctly at all times and children
encouraged to remain within the harness system.
“child proof” and yet comply with the legal requirements
of European Standard ECE R44. The harness must be
fastened and adjusted correctly at all times and children
encouraged to remain within the harness system.
Looking after your child seat
Food and drink may fi nd their way inside the buckle of
the harness. This can stop it from working properly – it
will not click. Wash in warm water until clean (dia A and
B).
the harness. This can stop it from working properly – it
will not click. Wash in warm water until clean (dia A and
B).
Cleaning the cover
Please read the labels on the cover for washing
instructions.
instructions.
DO NOT
tumble dry the cover – short spin and drip dry
only.
Cleaning the harness and seat shell
Sponge clean
ONLY
using hand soap and warm water.
DO NOT
take apart, or attempt to take apart, any part of
the harness or seat when cleaning.
DO NOT
use solvents, detergents or washing-up liquid
as these may weaken the harness and the seat.
DO NOT
lubricate or oil any part of the seat.
Removing and refitting the cover
Press in and hold the harness release button and with
your hand below the chest pads pull
your hand below the chest pads pull
BOTH
shoulder
straps forwards as far as they will go.
Pull the yoke out from behind the seat and unhook both
shoulder straps.
Pull the cover from the top of the seat and use the
method shown to bring the straps to the front of the seat
(dia 6c)
method shown to bring the straps to the front of the seat
(dia 6c)
(dia 6c)
. Unfasten the buckle and remove the comfort
pad by unfastening the hook and eye strip. Slide the
chest pads off of the shoulder straps. Gently pull the
cover off the seat, easing the shoulder straps, harness
buckle and adjuster strap through the slots in the cover.
chest pads off of the shoulder straps. Gently pull the
cover off the seat, easing the shoulder straps, harness
buckle and adjuster strap through the slots in the cover.
To refi t the cover, perform the process in reverse.
Make sure the straps are not twisted.
Make sure the straps are not twisted.
Important!
9-25kgs Group 1-2 (approximate age 9 months - 6 years)
GB
A
B
Britax_2h.indb 2
30/10/2007 16:23:44