National Instruments ODC5 用户手册
4
©
National Instruments Corporation
The SSR backplanes are divided into ports of eight modules each. The
8-, 16-, 24-, and 32-module backplanes have one, two, three, and four
ports respectively.
8-, 16-, 24-, and 32-module backplanes have one, two, three, and four
ports respectively.
Table 2 shows backplanes that need an interface to convert the digital
input/output (DIO) lines to map correctly. Table 2 also shows cables that
are available for connecting DAQ devices and SSR backplanes. Refer to the
National Instruments catalogue if your system is not listed in the table.
input/output (DIO) lines to map correctly. Table 2 also shows cables that
are available for connecting DAQ devices and SSR backplanes. Refer to the
National Instruments catalogue if your system is not listed in the table.
If you need an interface, use the SC-205X Series devices. You can connect
backplanes that do not need an SC-205X Series device directly to a DAQ
device because the modules map directly to one or more DIO ports.
backplanes that do not need an SC-205X Series device directly to a DAQ
device because the modules map directly to one or more DIO ports.
The SC-205X Series devices break out different DIO ports for use with
different products. For information on connecting, mounting, and cabling
your DIO ports using the SC-205X, see your SC-205X Series User Manual.
different products. For information on connecting, mounting, and cabling
your DIO ports using the SC-205X, see your SC-205X Series User Manual.
Table 2. SSR Backplane Cabling Guide
DAQ Device
8-Module
Backplane
16-Module
Backplane
24-Module
Backplane
32-Module
Backplane
DIO-24 (6503)
except
DAQCard-DIO-24
except
DAQCard-DIO-24
NB1 cable
or SC-205X adapter
or SC-205X adapter
2
(via NB8 cable)
NB1 cable
NB1 cable
NA
DAQCard-DIO-24
PSH27-50F-D1
1
cable or SC-205X
adapter (via NB8
cable)
adapter (via NB8
cable)
PSH27-50F-D1
1
cable
PSH27-50F-D1
1
cable
NA
DIO-32HS (6533)
SC-205X adapter
2
(via NB8 cable)
NA
NA
R6850-D1 cable
1
DIO-96 (6508)
SC-205X adapter
2
(via NB8 cable)
SC-205X adapter
(via NB8 cable)
(via NB8 cable)
SC-205X adapter
(via NB8 cable)
(via NB8 cable)
NA
50-pin MIO Series,
68-pin MIO E
(60xx) Series,
Lab/1200 Series,
DAQCard-700,
PC-LPM-16,
PC-AO-2DC
68-pin MIO E
(60xx) Series,
Lab/1200 Series,
DAQCard-700,
PC-LPM-16,
PC-AO-2DC
SC-205X adapter
2
(via NB8 cable)
NA
NA
NA
100-pin MIO E
(60xx) Series
(60xx) Series
R1005050 cable
1
or SC-205X adapter
2
(via NB8 cable)
R1005050 cable
1
R1005050 cable
1
NA
1
These cables are available separately and are not included with the SSR Series backplane.
2
This adapter is available separately. See the National Instruments Catalogue for information about cabling to connect an
SC-205X to your DAQ device.
NA means not applicable
NA means not applicable