Sony SCPH-79001CB 用户手册

Networking

You can connect the console directly to a broadband network using a 
network cable. Refer to the instructions supplied with the network device 
for details.
Setup configurations will vary depending on the type of Internet service in 
use. Additional network equipment (sold separately) may be required 
depending on the network setup. Refer to your Internet service provider or 
instructions supplied with the network equipment for details. For 
additional information, contact SCEA Consumer Services at 
1-800-345-7669.

The connection method will vary depending on the network device. 
Refer to the instructions supplied with the network device for details.

Warning
Do not connect network cables or telephone cords of the following types to the 
network connector. If you connect the wrong type of cable, too much electrical 
current may pass through the connector, causing a malfunction, excessive heat 
or fire in the connector:

- Network cables not appropriate for use with a 10Base-T/100Base-TX network

- Standard residential telephone lines

- Any ISDN (digital) compatible phone or data line

- PBX phone lines

- Other "unknown" types of telephone lines

After you have connected the console to a network, you will need to create 
and save a network configuration. This can be done using the supplied 
online start-up disc or PlayStation

®

2 format software compatible with the 

network adaptor (for PlayStation

®

2). Refer to the instructions for the 

online start-up disc or the instructions supplied with the software.

Depending on the type of Internet service used, you may need to provide your MAC 
address. You can find the MAC address for your console listed in the Version 
Information screen (

page 40).

Commercially available network cable

Console rear