Silverstone SST-ST30NF-V4.1 用户手册
8. LED Indicators s & Connections
8.1 LED Indicators
There shell be a single bi-color LED or Two LEDs, one AMBER and one GREEN, on
each hot swap power module to indicate power supply status. When AC is applied to the
power supply and standby voltage is available the GREEN LED shall BLINK. The
GREEN LED shall turn ON to indicate that all the power outputs are available. The
AMBER LED shall turn ON to indicate that the power supply has failed, shutdown due to
over current, or shutdown due to component failure.
The LED(s) shall be visible on the power supply’s exterior face. The LED location shall
meet ESD requirements. LED shall be securely mounted in such a way that incidental
pressure on the LED shall not cause it to become displaced.
each hot swap power module to indicate power supply status. When AC is applied to the
power supply and standby voltage is available the GREEN LED shall BLINK. The
GREEN LED shall turn ON to indicate that all the power outputs are available. The
AMBER LED shall turn ON to indicate that the power supply has failed, shutdown due to
over current, or shutdown due to component failure.
The LED(s) shall be visible on the power supply’s exterior face. The LED location shall
meet ESD requirements. LED shall be securely mounted in such a way that incidental
pressure on the LED shall not cause it to become displaced.
8.2 AC Input Connector
The AC input receptacle shall be an IEC 320 type or equivalent. The IEC 320 C receptacle
will be considered the mains disconnect.
8.3 DC Wire Harness and Connector Requirements
The AC input receptacle shall be an IEC 320 type or equivalent. The IEC 320 C receptacle
will be considered the mains disconnect.
8.3 DC Wire Harness and Connector Requirements
P1: 20-Pin ATX Motherboard Power Connector (qty. 1)
Connector housing: 20- Pin Molex : 39-01-2200 or 39-01-2205 or Equivalent
Pin Signal
Color
Pin Signal
Color
1 +3.3VDC
Orange
11
+3.3VDC/SENSE
Orange
BRN.
2 +3.3VDC
Orange
12 -12VDC
Blue
3 COM
Black 13 COM
Black
4 +5VDC
Red
14 PS-ON
Green
5 COM
Black 15 COM
Black
6 +5VDC
Red
16 C?OM
Black
7 COM
Black 17 COM
Black
8 PG
Gray 18 NC
9 +5VSB
Purple
19 +5VDC
Red
10 +12VDC
Yellow
20 +5VDC
Red
P2: 4-Pin P4 optional +12V Connector (qty. 1)
Connector housing: 8- Pin Molex : 39-01-2040 or Equivalent
Pin Signal
Color
Pin Signal
Color
1 COM
Black
3
+12VDC Yellow
2 COM
Black
4 +12VDC
Yellow
4-Pin HDD / CD ROM Drive Power Connectors (qty. 6)
Connector housing: TKP-5050-04 or Equivalent
Pin Signal
Color
1 +12VDC
Yellow
2 COM
Black
3 COM
Black
4 +5VDC
Red