Char-Broil 11601559 用户手册

下载
页码 8
ASSEMBLY GUIDE 
GRILL FINAL Assembly
           
Part 
 
Qty.  
C4 –  Controller
 
Step 1 
Install the Controller (C4) into the receptacle. Be sure to route the controller cord behind the towel bar when 
installing the controller. The control knob should be facing up as you engage the tip of the controller into the receptacle. Push 
the controller in all the way until you hear a click, this will ensure your controller is installed properly.
Congratulations! You have successfully completed the 
assembly of your grill. 
NOTE: Be sure to press the controller into the receptacle as far as it will go. Route the 
controller cord BEHIND the towel bar as shown.
C4 
Receptacle
Controller
Controller Tip
Towel Bar
Ground Fault Interrupter
?
 Since 1971 the National Electric Code (NEC) has 
required Ground Fault Interrupter devices on all 
outdoor circuits.
?
If your residence was built before 1971, check with a 
qualified electrician to determine if a Ground Fault 
Interrupter protector exists. 
?
Do not use this appliance if the circuit does not 
have GFI  protection.
?
Do not plug this appliance into an indoor circuit.
Fasteners
 
 
 
 
(qty 2)
Fiber Washer
 
 
 
10-24x3/8"
(qty 2)
screw
Fiber
Washer
(2 each)
C5
 
10-24x3/8"
Screws
(2 each)
Step 2 
Install the Lid Handle with 2 10-24x3/8" screws and 2 fiber washers as shown. 
C5 – Lid Handle
1
Visit www.sizzleonthegrill.com/user-forums to chat with Patio Bistro® owners just like you!