Kenmore 119.1665801 用户手册
8
Remove Firebox from Cabinet
Cut fastening straps on Cabinet Toe Plate. Remove the Toe Plate and set aside. Cut fastening
straps securing regulator and hose to cabinet.
straps securing regulator and hose to cabinet.
Unscrew and discard the 8 Phillips Head Bolts (M6x40mm) and 8 Washers (M6) from the corner
holes of the cabinet. Remove the crossbar and set aside.
With the aid of an assistant, carefully lift the cabinet up from the firebox and set aside. Remove
all foam packing from the Firebox. Raise lid and remove and unpack parts inside Firebox.
holes of the cabinet. Remove the crossbar and set aside.
With the aid of an assistant, carefully lift the cabinet up from the firebox and set aside. Remove
all foam packing from the Firebox. Raise lid and remove and unpack parts inside Firebox.
Install Casters to Cabinet
Place the Cabinet Assembly upside down and attach the 4 Casters to the bottom using 16 Phillips
Head Bolts (M6x16mm). Install both locking casters on rear of cabinet.
Phillips Head Bolt M6x16mm
Qty: 16
Assembly Instruction
1
2
Swivel Locking Caster
Cabinet Toe Plate
Crossbar
Swivel Caster