Lucent Technologies 6.1 用户手册

Issue 1

August 1998

Features 

Page 4-42

System Features 

4

This section contains instructions for setting the following Transfer feature options 
to allow users to transfer outside or inside calls to another telephone:

■

Transfer Return Interval

■

One-Touch Transfer

■

Transfer Audible

■

Type of Transfer

1. Transfer features, and any other feature that requires more than one SA 

button, can be disabled on Single-line telephones by removing all but one 
SA button through centralized programming. Refer to Form 4f, Tip/Ring 
Equipment.

2. If customers with CTI applications will frequently use the Conference 

feature, set the system Transfer Type to Ring and not Voice. This will 
minimize the possibility of broadcasting a conference over an unattended 
speakerphone.

3. If the DLC operator uses the DSS to transfer calls across a private 

network, the operator may want to use manual completion to avoid 
transfer without return to busy. If you subscribe to ANI or ICLID and 
automatic completion is selected, the ANI and ICLID information will be 
sent but calls will not return on busy.

4

1.

Under the Return Time Interval heading in the Transfer Options section of 
Form 8a, do 

one of the following:

■

To keep the factory setting, check the 4 rings box.

■

To indicate no return for transferred calls, check the 0 rings box.

■

To change the factory-set number of rings, check the third box and 
write the number of rings (1–9) in the space provided.

2.

Under the One-Touch Call Handling heading, do 

one of the following:

■

To keep the factory setting, check the One-Touch Transfer box and 
do 

one of the following:

— Check the Automatic Completion box to keep the factory-set 

automatic completion of transfers.

— Check the Manual Completion box to change the factory 

setting to manual completion.

■

To change from One-Touch Transfer to One-Touch Hold, check the 
One-Touch Hold box.