Topcon GPT-2003 用户手册

   6 SPECIAL MODE (Menu Mode)

6-2

To obtain elevation of the point at which setting the target prism is not possible, place the prism at any 
point on the vertical line from the target then carry out REM procedure as follows.

1) With prism height (h) input   (Example :h=1.5m)

After pressing the [MENU] key, press the [F4](P

↓

) 

key to get the menu on page 2.

[MENU]

[F4]

Press the [F1] key.

[F1]

Press the [F1](REM) key.

[F1]

Press the [F1] key.

Enter prism height. *1)

Collimate prism.

[F1]

[F1]

Enter R.HT

[F4]

Collimate P

Press the [F1](MEAS) key.
Measuring starts.

[F1]

Target K

Prism height

Instrument

Prism

  

↓

  

↓