KitchenAid W10524723A 用户手册

Electric igniters automatically light the surface burners when 
control knobs are turned to LITE.
Before setting a control knob, place filled cookware on the grate. 
Do not operate a burner using empty cookware or without 
cookware on the grate.
The flame should be adjusted so it does not extend beyond the 
edge of the pan.

1. Push in and turn knob counterclockwise to LITE.

All surface burners will click. Only the burner with the control 
knob turned to LITE will produce a flame.

2. Turn knob to anywhere between HIGH and LOW.

The left front burner is designed to give maximum power when fully 
on. It can be used to rapidly bring liquid to a boil and to cook large 
quantities of food.

The Even-Heat™ Simmer Burner feature allows for more precise 
simmering and low temperature cooking. It is the right rear burner.

In case of prolonged power failure, the surface burners can be lit 
manually. Hold a lit match near a burner and turn knob 
counterclockwise to LITE. After burner lights, turn knob to desired 
setting.

1. Press WARMING DRAWER ON to select the Warming Drawer function at the Low setting.
2. To select a higher temperature setting, press WARMING DRAWER ON a second time for the 

Medium setting and a third time for the High setting.

3. Press START to begin preheating the warming drawer.
4. Allow the warming drawer to preheat for 15 minutes.
5. Place the cooked food(s) in the warming drawer
6. Press WARMING DRAWER OFF to turn off the heating element.
Refer to the “Warming Drawer” section for information.

1. Press WARMING DRAWER SLOW COOK to select the Slow Cook function at the Low 

setting.

2. To select a higher temperature setting, press WARMING DRAWER SLOW COOK a second 

time for the High setting.

3. Place the food(s) in the warming drawer.
4. Press START to begin heating the warming drawer.
5. Press WARMING DRAWER OFF to turn off the heating element.
Refer to the “Warming Drawer” section for information.

See the “Clean Cycle” section.

No keypads will function with the controls locked.
1. Check that the oven and the Timer are off. 
2. Press and hold the “0” keypad for 3 seconds.
3. If enabled, a tone will sound, and “CONTROL LOCKED” will be displayed.
4. Repeat to unlock.

Enables you to personalize the audible tones and oven operation to suit your needs. See the 
“Oven Use” section.

REMEMBER: When range is in use, the entire cooktop area 
may become hot.