Amana W10162526A 用户手册

下载
页码 40
13
Style 1
To Remove and Replace the Plastic Cover:
1. Remove the crisper(s).
2. Lift the front of the cover to remove the cover support. Then 
lift the cover up and slide it out.
3. Replace the cover by fitting the cover tabs into lowest cabinet 
slots and pushing them in. Lower the front retainers into 
place.
4. Insert cover support (with the long tab toward the front) into 
the groove on the underside of the cover.
NOTE: If the support needs adjustment, turn base clockwise 
to raise or counterclockwise to lower.
Style 2
To Remove and Replace Glass Covers (on some models):
1. Pull the glass straight out.
2. Replace the glass by pushing it straight in.
Crisper Humidity Control (on some models)
You can control the amount of humidity in the moisture-sealed 
crisper. Adjust the control to any setting between LOW and 
HIGH.
LOW (open) lets moist air out of the crisper for best storage of 
fruits and vegetables with skins. 
Fruit: Wash, let dry and store in refrigerator in plastic bag or 
crisper. Do not wash or hull berries until they are ready to use. 
Sort and keep berries in original container in crisper, or store 
in a loosely closed paper bag on a refrigerator shelf.
Vegetables with skins: Place in plastic bag or plastic 
container and store in crisper. 
HIGH (closed) keeps moist air in the crisper for best storage of 
fresh, leafy vegetables. 
Leafy vegetables: Wash in cold water, drain and trim or tear 
off bruised and discolored areas. Place in plastic bag or 
plastic container and store in crisper.
Utility or Egg Bin 
(on some models -Accessory) 
Depending on your model, you may have a one, two or three 
piece bin. Eggs may be stored in the egg tray or loose in the bin. 
NOTE: Store eggs in a covered container for long-term storage. If 
your model does not have an egg storage bin, store eggs in their 
original container on an interior shelf.
FREEZER FEATURES
Your model may have some or all of these features. Features that 
can be purchased separately as product accessories are labeled 
with the word “Accessory.” Not all accessories will fit all models. 
See the “Assistance or Service” section if you are interested in 
purchasing one of the accessories.
Freezer Shelf
(on some models)
To Remove and Replace the Freezer Shelf:
1. Remove items from the shelf.
2. Lift back of shelf over stop and slide shelf straight out.
3. Replace the shelf by sliding the back of the shelf into the 
tracks on walls of cabinet.
4. Be sure to slide the shelf in all the way.
Important information to know about glass shelves 
and covers:
Do not clean glass shelves or covers with warm water when 
they are cold. Shelves and covers may break if exposed to 
sudden temperature changes or impact, such as bumping. 
For your protection, tempered glass is designed to shatter 
into many small, pebble-size pieces. This is normal. Glass 
shelves and covers are heavy. Use special care when 
removing them to avoid impact from dropping.