Amana ATF1822MR 产品宣传页

3" (7.5 cm)

2" (5.1 cm)

ATB1822MR
ATF1822MR

Electrical: A 115-Volt, 60-Hz, AC-only 15- or
20-amp fused, grounded electrical supply is
required. It is recommended that a separate
circuit serving only your refrigerator be provided.
Use an outlet that cannot be turned off by a
switch. Do not use an extension cord.

Water: Connect the ice maker to a cold water
supply with water pressure between 30 and 
120 psi (207 and 827 kPa).

If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the system needs to be a minimum
of 40 to 60 psi (276 to 414 kPa).

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only.  For complete details, see Installation
Instructions packed with product.  Specifications subject to change without notice.

Ref. W10214129

11-07-08

To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.3 cm) space on
each side. Allow 3" (7.5 cm) of space between overhead cabinets and refrigerator
top. Allow at least 1" (2.5 cm) between back of cabinet and the wall. If your
refrigerator has an ice maker, make sure you leave some extra space at the back for
the water line connections.

If you are installing your refrigerator next to a fixed wall, leave 2" (5.1 cm) minimum
on the hinge side (depending on your model) to allow for the door to swing open.

NOTE: It is recommended that you do not install the refrigerator near an oven,
radiator, or other heat source. Do not install in a location where the temperature will
fall below 55°F (13°C).

includes

rollers

extended 3/4"

(1.9 cm)

includes

rollers

extended 3/4"

(1.9 cm)

overall to

back of coils

18 cu. ft.

29-1/8"

28"

28-1/8"

67-3/8"

68"

(74 cm)

(71.1 cm)

(71.4 cm)

(171.1 cm)

(172.7 cm)