Amana Bottom Mount Refrigerator 用户手册

下载
页码 70
RS1200001
2
November 1996
Safety Symbols, Words, and Labels
DANGER
Immediate hazards which will result in
severe personal injury or death.
WARNING
Hazards or unsafe practices which could
result in severe personal injury or death.
Caution
Hazards or unsafe practices which could
result in minor personal injury or product or
property damage.
Amana Refrigeration, Inc. is not responsible for
personal injury or property damage resulting from
improper service. Review all service information
before beginning repairs.
Warranty service must be performed by an
authorized Amana
®
 technician. Amana Refrigeration,
Inc. also recommends contacting an authorized
Amana
®
 technician if service is required after
warranty expires. Contact (319) 622-5511 for further
assistance.
Electrical Requirements
WARNING
Electrical Grounding Instructions -- This
refrigerator is equipped with a three-prong
(grounding) plug for protection against
possible shock hazards. If a two-prong wall
receptacle is encountered, contact a qualified
electrician and have the two-prong wall
receptacle replaced with a properly grounded
three-prong wall receptacle in accordance
with the National Electrical Code.
Refrigerator is designed to operate on a
separate 103 to 126 volt, 15 amp., 60 cycle
line.
Do not under any circumstances cut or
remove the round grounding prong from
the plug. Refrigerator must be grounded
at all times. Do not remove warning tag
from power cord.
WARNING
Do not use a 2 prong adapter.
Do not use an extension cord.
Safety and Electrical Information
Grounding Information
Standard color for ground wires is green or green with
yellow striping. Ground wires are not to be used as
conductors carrying current. Compressor, condenser
fan motor, evaporator fan motor, defrost timer,
temperature control, and ice maker are grounded
through an individual wire attached to electrical
component and another part of refrigerator.  Ground
wires should not be removed from individual
components while servicing unless component is
removed and replaced.  It is extremely important to
replace all grounds prior to completing service. When
nib-headed screw is used to complete grounding
circuit, replace screw with a like screw.