Amana Bottom Mount Refrigerator 用户手册
Machine Compartment Disassembly Procedures
RS1200001
38
November 1996
Condensate Drain Pan
1. Remove toe grille plate by removing screws.
2. Pull drain pan forward away from condenser.
1. Remove toe grille plate by removing screws.
2. Pull drain pan forward away from condenser.
Condenser
1. See Compressor, Condenser, Condenser Fan
1. See Compressor, Condenser, Condenser Fan
Access.
2. See Condenser Fan Motor, steps 1-3.
3. Remove three 1/4" hex head screws that mount
3. Remove three 1/4" hex head screws that mount
condenser to machine compartment floor.
4. Score capillary tube at drier and break.
5. Unbraze condenser inlet.
6. Slide condenser assembly out.
7. Unbraze 3/16" copper tube from condenser to
5. Unbraze condenser inlet.
6. Slide condenser assembly out.
7. Unbraze 3/16" copper tube from condenser to
drier to be reused on replacement condenser and
drier.
drier.
Power Disconnect Switch
1. See Machine Compartment Access.
2. Remove leads.
3. Pop switch out through front.
1. See Machine Compartment Access.
2. Remove leads.
3. Pop switch out through front.
Showroom Switch
1. See Low and High Voltage Board and Showroom
1. See Low and High Voltage Board and Showroom
Switch Access.
2. Remove screws and pull switch down.
3. Remove leads.
3. Remove leads.