GE PSHS6MGZSS 用户指南

8

Large Bins
The larger refrigerator door bins and freezer

tilt-out door bins are adjustable. 
To remove: Lift the front of the bin straight

up, then lift up and out.
To replace or relocate: Engage the back side

of the bin in the molded supports on the

door. Then push down on the front of the bin.

Bin will lock in place.

Small Bins
To remove: Lift the front of the bin straight up

then out.
To replace: Position the bin above the

rectangular molded supports on the door.

Then slide the bin down onto the support 

to lock it in place.

The snugger helps prevent tipping, spilling 

or sliding of small items stored on the door

shelf. Place a finger on either side of the

snugger near the rear and move it back 

and forth to fit your needs.

Snugger

This shelf splits in half and slides under itself

for storage of tall items on the shelf below.
This shelf can be removed and replaced 

or relocated just like the Slide-Out Spillproof

Shelves.
On some models, this shelf cannot be used

in the lowest position.

The slide-out spillproof shelf allows you 

to reach items stored behind others. 

The special edges are designed to help

prevent spills from dripping to lower shelves. 
To remove:
Slide the shelf out until it reaches the stop,

then press down on the tab and slide 

the shelf straight out.

To replace or relocate:
Line the shelf up with the supports and slide 

it into place. The shelf can be repositioned

when the door is at 90° or more. To reposition

the shelf, slide the shelf past the stops and

angle downward. Slide shelf down to the

desired position, line up with the supports

and slide into place.
Make sure you push the shelves all the way