GE PTC22MBMBB 产品宣传页

TM

69-7/8

68-3/4

35-3/4

28-3/8

23-3/4

61

26-3/4

38-1/4

25"
Counter
Top

Electrical

Water

3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)

24-1/2"* Side panels

24"
Cabinet

8' Ceiling

13" to 14"
Cabinet

12" 
Soffit

70-1/4"*

36"

24"

Installation Tips to Maximize the Built-In Look
• All wall/floor moulding should be removed prior to installation.
• Water recess on rear wall recommended to prevent water line damage. 

48" minimum length 1/4" diameter water line tubing recommended.

• When possible, recess both copper water line and electrical outlet. 

(See local codes) 

• Front and rear leveling legs are adjustable for the built-in look. 

(See owner’s manual)

– At least 2" (51 mm) on the handle side for fingertip clearances.

– At least 3/16" (4.75 mm) at the top and bottom edges to allow for trim flange.

– The installation of 3/4" (19 mm) thick side panels requires less clearance

because the space between the door and adjacent countertop is wider.

• To avoid door contact to countertop consider: 

– Miter the corner of the adjacent countertops 45°, or pull the refrigerator

forward enough to avoid contact.

IMPORTANT:
Before finalizing specifications for your GE Profile Performance

™

CustomStyle

™

Refrigerator, Please NOTE: 

• A minimum of 36" is required for refrigerator installation
• Be sure to allow for 1/2" or 3/4" side panels in addition to the 36" minimum

Top View

Front View

Total volume and shelf
area are calculated by the
Association of Home
Appliance Manufacturers’
standards.

Listed by
Underwriters
Laboratories

For answers to your Monogram,

®

GE Profile

™

or 

GE appliance questions, visit our website at
GEAppliances.com or call 
GE Answer Center

®

service, 800.626.2000.