GE 200D2600P010 用户手册

13

The icemaker will produce seven cubes 
per cycle—approximately 100–130 cubes 
in a 24-hour period, depending on freezer
compartment temperature, room
temperature, number of door openings 
and other use conditions.

If the refrigerator is operated before the
water connection is made to the icemaker,
set the power switch in the O (off) position.

When the refrigerator has been connected
to the water supply, set the power switch to
the l (on) position.

The icemaker will fill with water when it 
cools to 15°F (–10°C). A newly-installed
refrigerator may take 12 to 24 hours to begin
making ice cubes.

Throw away the first few batches of ice to
allow the water line to clear.

Be sure nothing interferes with the sweep 
of the feeler arm.

When the bin fills to the level of the feeler
arm, the icemaker will stop producing 
ice. It is normal for several cubes to be
joined together.

If ice is not used frequently, old ice cubes
will become cloudy, taste stale and shrink. 

If ice cubes get stuck in the icemaker, the
green power light will blink. To correct this,
set the power switch to O (off) and remove
the cubes. Set the power switch to I (on) to
restart the icemaker. After the icemaker has
been turned on again, there will be a delay
of about 45 minutes before the icemaker
resumes operation.

NOTE: In homes with lower-than-average water
pressure, you may hear the icemaker cycle multiple
times when making one batch of ice.

A newly-installed refrigerator may take 12 to 24 hours to begin making ice.

Pull the upper freezer shelf straight
out to access the icemaker. Always
be sure to replace the shelf. The
shelf can be used for storage.

To access ice, pull the drawer forward.

To remove the drawer, pull it straight out and
lift it past the stop location.

Icemaker

Feeler Arm

Power
Switch

Green
Power Light

Ice Drawer

Ice Drawer

Shelf