GE ZIF36N RH 用户手册
20
Tools and materials required:
• #2 Phillips screwdriver
• Drill and appropriate bits
• Custom door panel
• Custom Handle
• Safety glasses
• #2 Phillips screwdriver
• Drill and appropriate bits
• Custom door panel
• Custom Handle
• Safety glasses
Parts List:
A. Handle side door extrusion (for left hand models)
B. Handle side door extrusion (for right hand models)
A. Handle side door extrusion (for left hand models)
B. Handle side door extrusion (for right hand models)
This kit provides the necessary framework to install
a custom handle, of your choice, onto a 1/4
a custom handle, of your choice, onto a 1/4
″ thick
custom panel. (Handles not included.) The extrusions
in this kit allow the custom handle to be secured to
the door structure, rather than the door panel.
• Select the extrusion for your model, discard other
in this kit allow the custom handle to be secured to
the door structure, rather than the door panel.
• Select the extrusion for your model, discard other
extrusion.
Step 1
Remove
handle
Remove
handle
Right hand door swing models are illustrated in these
instructions. Follow these instructions for left hand
models.
instructions. Follow these instructions for left hand
models.
• Open door to 90°. Remove the screws from the full
length aluminum handle.
• Retain screws. Discard handle.
ZKHR1 Trim Kit (For 1/4
″ Panels)
Support for Custom Handles