GE GTL12HBX 用户手册
9
Installation Instructions
REVERSING THE DOOR SWING
REMOVE THE FREEZER DOOR
Remove the hinge cover screws (some models have
lock washers with each screw), top hinge and shim.
lock washers with each screw), top hinge and shim.
Set the door on a non-scratching surface with
the outside up.
the outside up.
NOTE: When removing the door, watch for washer(s)
between the center hinge and the bottom of the
freezer door that may stick to the door. Do not lose.
between the center hinge and the bottom of the
freezer door that may stick to the door. Do not lose.
CAUTION:
Do not let door drop
to the floor. To do so could damage the door stop.
1
IMPORTANT NOTES
When reversing the door swing:
• Read the instructions all the way through before starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid using
them in the wrong places.
• Provide a non-scratching work surface for the doors.
IMPORTANT: Once you begin, do not move the cabinet
until door-swing reversal is completed.
until door-swing reversal is completed.
These instructions are for changing the hinges from the
right side to the left side—if you ever want to change the
hinges back to the right side, follow these same instructions
and reverse all references to left and right.
right side to the left side—if you ever want to change the
hinges back to the right side, follow these same instructions
and reverse all references to left and right.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves.
TOOLS YOU WILL NEED
8 mm Socket driver
Phillips screwdriver
Putty knife or
thin-blade screwdriver
Masking tape