GE ZIBI240 用户手册

18

The Problem Solver

• Icemaker power switch is in the I (on) position, but the water supply

to the appliance has not been connected or is kinked. Set the power 
switch to the O (off) position. Keeping it in the I (on) position will 
damage the water valve or straighten the water supply line.

• Old cubes need to be discarded.

• Ice storage bin needs to be emptied and washed.

• Unsealed packages in fresh food compartment may be 

transmitting odor/taste to ice cubes.

• Interior of appliance needs cleaning. See Care and Cleaning.

• Door may have been left open.

• Interior needs cleaning. See Care and Cleaning.

• Keep open box of baking soda in appliance; replace every 3 months.

• Door gasket is sticking or folding over. Apply petroleum jelly or 

paraffin wax to the face of the gasket.

• The door is hitting an internal component inside the 

appliance. Adjust interior components to prevent interference.

• Not unusual during periods of high humidity. Wipe surface dry.

• Door left open or package holding door open.

• Too frequent or too long door openings.

• In humid weather, air carries moisture into appliance when doors 

are opened.

• No power at outlet.

• Light bulb needs replacing. See Care and Cleaning.

• Normal air flow cooling motor. In the refrigeration process, it is 

normal that heat be expelled in the area under the appliance. 

Some floor coverings are sensitive and will discolor at these safe 
and normal temperatures.

• Adaptive defrost keeps compressor running during door openings. 

This is normal. The appliance will cycle off after the door remains 

closed for two hours.

• Normal operation in extreme temperatures.

• Unit just plugged in. Allow 24 hours for the system to stabilize.

• Door open for too long. Allow 24 hours for the system to stabilize.

• Warm contents added to appliance. Allow 24 hours for the system

to stabilize.

• Defrost cycle is in process. Allow 24 hours for the system to stabilize.

• Thermistor may be blocked, which can affect the overall temperature. 

The thermistor is located on the right hand side just above the 
top shelf.

• Temperature may be in lockout mode. Press both + and – pads for

5 seconds to unlock the temperature.

• Thermistor may be blocked, which can affect the overall temperature. 

The thermistor is located on the right hand side just above the 
top shelf.