GE 48 用户手册
CUSTOMIZATION BASICS:
Stainless Steel Wrapped Models
42
42
″ wide model—PSB42LSRBV
48
″ wide model—PSB48LSRBV
Stainless Steel Wrapped Refrigerators
Stainless Steel wrapped refrigerators have
wrapped doors and grille panels, and beveled
edges. These models are shipped ready for
installation.
Stainless Steel wrapped refrigerators have
wrapped doors and grille panels, and beveled
edges. These models are shipped ready for
installation.
Trimmed Models
42
42
″ wide models—PSB42LGRWV, PSB42LGRBV
48
″ wide models—PSB48LGRWV, PSB48LGRBV
Trimmed Refrigerator Panels
Trimmed refrigerators are designed to be
customized with decorative panels. Field
installed custom door and grille panels are
required. There are three custom panel
options. You can install a 1/4
Trimmed refrigerators are designed to be
customized with decorative panels. Field
installed custom door and grille panels are
required. There are three custom panel
options. You can install a 1/4
″ framed panel,
a 3/4
″ framed custom panel or a 3/4″ full-
width overlay custom panel.
1/4
″ Framed Panels
You may install 1/4
″ thick custom panels from
your cabinet manufacturer. The decorative
panel slides into the factory installed trim.
Or, order black, white or stainless steel
accessory panels from your Profile
panel slides into the factory installed trim.
Or, order black, white or stainless steel
accessory panels from your Profile
™
dealer.
Door Handles
The handles can be used to accommodate
both framed or custom panels.
NOTE: For 3/4
The handles can be used to accommodate
both framed or custom panels.
NOTE: For 3/4
″ custom panels, please refer
to diagrams on page 23 for optimum handle
clearance.
clearance.
3/4
″ Framed Custom Panels
3/4
″ framed custom panels are secured
to a 1/4
″ finished backer panel. They are
designed to slide into the factory installed
trim, no kits required. The backer panel
will be exposed on the handle side and
therefore must be finished.
trim, no kits required. The backer panel
will be exposed on the handle side and
therefore must be finished.
3/4
″ Full-Width Overlay Custom Panels
3/4
″ full-width overlay custom panels are
designed to slide into the factory installed
trim, no kits required. In this design, you
can achieve a nearly trimless appearance. A
spacer panel must be installed between the
finished backer and appearance panel. The
backer panel will be exposed on the handle
side and therefore must be finished.
trim, no kits required. In this design, you
can achieve a nearly trimless appearance. A
spacer panel must be installed between the
finished backer and appearance panel. The
backer panel will be exposed on the handle
side and therefore must be finished.
Accessory Panels
White, black and stainless steel accessory
panels are available from your Profile dealer.
Panels are cut to size and ready to install.
White, black and stainless steel accessory
panels are available from your Profile dealer.
Panels are cut to size and ready to install.
Door Handles
3/4" Custom Panel
3/4" Overlay Panel
.10" Thick Spacer Panel
1/4" Thick Backer Panel
Framed Panel
Door Handles
Installation Instructions
20
Models
White
Black
Stainless
Acrylic
Acrylic
Steel
PSB42LGRWV
PSPK42DWW
PSPK42DSS
PSB42LGRBV
PSPK42DBB
PSPK42DSS
PSB48LGRWV
PSPK48DWW
PSPK48DSS
PSB48LGRBV
PSPK48DBB
PSPK48DSS