WhisperKool 2500 用户手册

Page 14

SL 072710

When power is applied to the unit, the control will 

briefly display all symbols, and the Compressor 

symbol will be displayed (if unit is calling for cooling).  

There may be a brief delay prior to the evaporator 

and condenser fans turning on.

After the bottle probe has reached the set point (all 

units are shipped with the set point of 55°F and a 

differential of 1°F).  The WHM is an adjustable fea-

ture which allows the customer the convenience of 

managing the humidity enhancement of their wine 

cellar.  The WHM is one of the many Customer Prefer-

ence Selection features which allow the customer the 

ability to fine tune the controls. This feature is set to 0 

when shipped but if needed can be adjusted.

The Anti Short Cycle ensures that the unit will remain 

off for a period of 5 minutes after the unit has reached 

the set point to allow the pressure in the refrigeration 

system to equalize prior to starting the compressor.

The Defrost Cycle is a precautionary measure, as icing 

or frosting of the coil does not occur during normal 

operation.   The system will go through a defrost cycle 

every 4 hours.  During the defrost cycle, the in-cellar 

fan will provide air flow across the in-cellar coil, which 

will evaporate any frost accumulation.  

In the event that a bottle probe should fail, the APST 

(Advance Product Safety Technology) will automati-

cally transition the Refrigeration Compressor cycles 

to a pre-determined time series (based on detailed 

laboratory testing), which will ensure that the prod-

uct is kept within the safe range.