Smeg 142396 用户手册

142396

Prior to any cleaning. Please disconnect the 
appliance from the mains (turn the thermostat 
button to the position   and pull the power cord 
from the mains outlet). Special antibacterial 
protection in top layer of inner walls prevents growth 
of bacteria and keeping the interior clean and germ 
free.
Please remove traces of any detergents you may 
have used. 

•

 Clean the exterior of the appliance with warm 

water and mild liquid detergent.

•

 For cleaning of plastic, coated, or aluminum parts 

avoid using abrasive or special cleansing agents 
(like the stainless steel polish), otherwise you may 
damage the surface.

•

 Clean coated and aluminum surfaces using the 

soft cloth and alcohol based cleaning agent (like 
glass cleaner).

•

 Wash the interior of the appliance with liquid 

detergent and lukewarm water, mixed with a little 
vinegar.

•

 The groove and drain outlet located below the 

cooling panel at the rear wall collect the drained 
water, so they must not be blocked up 

  (e.g: with food particles). Make sure you inspect 

them periodically and clean if necessary (use 
plastic straw to free the outlet hole).

•

 The condenser on the rear wall must always be 

clean and free of dust or kitchen fumes deposits, 
therefore clean the dust periodically with non-
metallic brush or vacuum cleaner. 

•

 Additionally clean also the drip pan above the 

compressor. If you removed the pan, please make 
sure you replace it in same position, and check 
that it is horizontal (very important).

•

 Ice and/or frost deposits exceeding 3-5 mm 

increase energy consumption, so should be 
removed regularly. Do not use sharp pointed 
objects, solvents or sprays.

•

 After cleaning switch the appliance on and place 

15