True Manufacturing Company TD-50-18-S-LT 用户手册

•  Phillips screw driver

•  3/8” socket or 3/8” wrench

Step 2
A.  Use a phillips screw diver and remove four 

screws from the L-bracket connected the unit 
to the wood skid (see image 1).  Then use a 3/8” 
socket or wrench and remove the L-bracket 
from the unit (see image 2).

When lifting unit do not use the countertop as 

a lifting point.  Also remember to leave cabinet 

upright for 24 hours before plugging 

into power source. 

B.  Remove skid by unscrewing all base rail anchor 

brackets.  Place skid to the side.

C.  Carefully upright cabinet.

Removing 

bracket from 

skid.

Removing  

bracket from 

cabinet.

Step 3
A.  Set unit in its final location. Be sure there is 
adequate ventilation in your room.  Under extreme 
heat conditions, (100°F+, 38°C+), you may want to 
install an exhaust fan.

B.  Proper leveling of your True cooler is critical to 
operating success (for non-mobile models). Effective 
condensate removal and door operation will be 
effected by leveling.

C.  The cooler should be leveled front to back and 
side to side with a level. 

D.  Ensure that the drain hose or hoses are 
positioned in the pan.

E.  Free plug and cord from inside the lower rear of 
the cooler (do not plug in).

F.  The unit should be placed close enough to the 
electrical supply so that extension cords are never 
used.