True Manufacturing Company TMC-34-SS 用户手册

下载
页码 16
The power cord of this appliance is equipped 
with a 3-prong (grounding) plug which mates 
with a standard 3-prong (grounding) wall outlet to 
minimize the possibility of electric shock hazard 
from this appliance.
Have the wall outlet and circuit checked by a 
qualified electrician to make sure the outlet is 
properly grounded.
If the outlet is a standard 2-prong outlet, it is your 
personal responsibility and obligation to have it 
replaced with the properly grounded 3-prong wall 
outlet.
The refrigerator should always be plugged into 
it’s own individual electrical circuit, which has a 
voltage rating that matches the rating plate.
This provides the best performance and also 
prevents overloading building wiring circuits 
which could cause a fire hazard from overheated 
wires.
Never unplug your refrigerator by pulling on the 
power cord.  Always grip plug firmly and pull 
straight out from the outlet.
Repair or replace immediately all power cords that 
have become frayed or otherwise damaged. Do not 
use a cord that shows cracks or abrasion damage 
along its length or at either end.
When removing the refrigerator away from the 
wall, be careful not to roll over or damage the 
power cord.
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.  
For personal safety, this appliance must be properly grounded.
WARNING!
USE OF ADAPTER PLUGS 
 
NEVER USE AN ADAPTER PLUG!  Because of potential safety hazards under certain 
conditions, we strongly recommend against the use of an adapter plug.
............ www.truemfg.com ............
SAFETY INFORMATION
True Food Service Equipment, Inc.
3
3
North America Use Only!
NEMA plugs
TRUE uses these types of plugs.     
If you do not have the right outlet 
have a certified electrician install 
the correct power source.