Avanti WD29EC 说明手册
8
TAKING DISPENSER OUT OF SERVICE
?
If the water dispenser will not be used for a long period of time, unplug the power cord from the wall
outlet.
outlet.
?
Drain the water through the faucets.
?
Drain the water from the tank by removing the plug from the bottom of the dispenser.
PROBLEMS WITH YOUR WATER DISPENSER?
You can solve many common water dispenser problems easily, saving you the cost of a possible service
call. Try the suggestions outlined below to see if you can solve the problem before calling the servicer.
call. Try the suggestions outlined below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
Water dispenser does not operate.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The circuit breaker tripped or a blown fuse.
Water cooler is not cold enough.
Check to be sure the power switch on the back is
ON.
Too much water has been drawn within a short
period of time. If more than two 8 oz. Cups have
been drawn within a 25-minute span, you will need
to wait up to one hour to reach optimal
temperature.
ON.
Too much water has been drawn within a short
period of time. If more than two 8 oz. Cups have
been drawn within a 25-minute span, you will need
to wait up to one hour to reach optimal
temperature.
Vibration.
Check to assure that the water dispenser is level.