Whirlpool WHAB-6014 用户手册

6. Grasp the base of the filter

cartridge with the word “Front”
facing you.

FRONT

7. Lay the filter cartridge into the

filterhead valve cradle.

FRON

FRONT

8. Push filter catridge up into the

filterhead valve until it stops.
The 2 colorstrips should be
aligned (one in the filterhead
valve cradle and one in the
filter cartridge).

FRONT

IMPORTANT:
Do not install the filter cartridge
as shown below.

11. Take the “B” filterhead valve

and place it at the top right of
the mounting bracket. Pressing
the filterhead valve firmly
against the mounting bracket,
slide the unit downwards
securing both the top and
bottom tabs.

12. Slide the “B” filterhead valve

to the left, making sure the
connector tube goes into the
“B” filterhead valve white collet
“water in”. Slide to the left until
it is centered on the second
mounting bracket. (You should
hear a slight click, when “B”
filterhead valve is secure).
If you do not install the filter C,
put the elbow fitting with the
blue collet into “B” filterhead
valve blue collet “water out”.

13. Repeat step 5 to install filter B.

10. Place the connector tube into

the blue collet “water out” on
the right side of the first
assembled filterhead valve.

9. Push back on a downward arc

until the filter cartridge stops.

FRONT

How to insert tubing

in easy to connect fitting

Collet

Body

Tube

Figure A

Figure B

Figure C

Insert the tubing squarely. See figure A.
Make sure to insert tube completely. See figure B.
Push in collet while removing tube. See figure C.